LCD – For the Novice and the Expert
by Kristopher Kubicki on September 4, 2003 12:13 AM EST- Posted in
- Displays
Monitor care
Surprisingly, one of the most frequent questions we noticed in our forums was simply, “How do I care for my monitor?” LCDs are still expensive pieces of equipment, so they require a little bit of tender loving care.
The most important matter is keeping the LCD screen clean. For those of you fortunate enough to have LCDs with glass bezels (like the AG Neovo S-18), use only warm water and a lint free cloth. Any other alcohol or ammonia based cleaner will strip the anti-glare coating off and ruin your bezel surface.
For ordinary LCD panels that do not have an additional glass bezel, distilled water is still one of the best cleaners. However, great care needs to be taken to ensure that the right amount of pressure is applied to the screen when cleaning. Too much pressure will crack the substrate. This editor recommends using a little bit of vinegar mixed with water on a lint free cloth to clean the monitor surface.
Using a paper towel will leave small abrasions in the anti-glare coating and bezel. Always apply the cleaning solution to the cloth first. Finally, wipe the cloth from corner to corner, and then side to side, starting from the top to bottom. This will leave the most even surface.
Facebook
Twitter
RSS
63 Comments
View All Comments
Anonymous User - Thursday, September 4, 2003 - link
A good article.I my self use CML174.Made a lot of difference to my eyes compared to CRT.
Anonymous User - Thursday, September 4, 2003 - link
Outstanding reading, thanks.mechBgon - Thursday, September 4, 2003 - link
Nice work, Kristopher. : )KristopherKubicki - Thursday, September 4, 2003 - link
#5 fixed it - sorry.#7 fixed that one too. Yeah rubbing pixels really doesnt do much good. I think NewEgg is going to be pissed when they find out I messed up their monitor pretty good.
#6 Say it aint so!! We want to be the only ones ;)
Kristopher
Shalmanese - Thursday, September 4, 2003 - link
Finally! It took long enough for you to get this out :). Great article, finally an article about LCD's which isn't full of opinion and hearsay.dvinnen - Thursday, September 4, 2003 - link
ok, maybie you did mean that. Hard to tell, you say you scuffed the monitor, then go on to tell other people how to do it...I problay just need some sleep...
dvinnen - Thursday, September 4, 2003 - link
Rubbing the pixils does more good then harm then?<<<Personally, it seems that rubbing the pixels does more good than harm so continue at your own risk.>>>
Might want to fix that one
dvinnen - Thursday, September 4, 2003 - link
good to hear it. Seems like alot of the hardware sites are getting there act together.Anonymous User - Thursday, September 4, 2003 - link
On page 6, where you talk about the cables in the picture (the sentence right below the picture), shouldn't the good cable be the *upper* one or am I missing something?KristopherKubicki - Thursday, September 4, 2003 - link
Yeah, new editors and kind of a revamped AT staff. We went through a lull period after we lost Matthew, but now we have some really good writers and a lot of great content to write about.Just wait till Computex and COMDEX - 3 and 4 reviews per day sounds about right.
Kristopher